Features:

• Low insertion loss, high return loss

• MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies

• Economical solution for mass-termination of fiber

• Designed for low loss and standard loss SM and MM applications

• Ruggedized round cable, oval cable and bare ribbon options available

• Color coded housings available to differentiate fiber type, polish type and/or connector grade

• Good in repeatability and exchangeability

The MPO connector is a type of fiber connecter. MPO (Multi-Fiber Push On) is a multi-core fiber connecter

type. The MPO high -density fiber pre -connection system is currently mainly used in the application of high

-density environments of data centers, the application of optical fiber to the building, and the internal

connection applications inside the optical transceiver equipment such as the optical device, 40G, 100G,

QSFP+.

MPO connector types are distinguished according to the IEC 61754-7 regulations: core numbers (array

number), male head (Male, Female), polarity (PC or APC).

MPO-MPO 3.0mm LSZH Fiber Patch Cord. MPO Fiber Patch Cord is terminated with MPO connector on

both ends. MPO Fiber Patch Cord connect MPO modules together as a permanent link. The MPO Fiber

Patch Cord are available with 12, 24, 48,60,72 ,96,144fibers. Support speeds up to 10/40/100Gbps data

center solutions. They are typically adopted to interconnect cassettes, panels or ruggedized MPO fan-outs,

and to facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber

environments. Besides, MPO also provides much flexibility and convenience once you have to change the

connector style in the patch panels. Instead of changing the connector on the cable trunk, just installing a

new cassette with the new connector style on the crossconnect side of the patch panel.

The 12F MPO-MPO Fiber Patch Cord is designed for 40G QSFP+ SR4, 40G QSFP+ CSR4 and 100G

QSFP28 SR4 optics direct connections and high-density data center.